Traxxas 89076-4-RNR Maxx : 1/10 Scale 4Wd Brushless

Cars & TrucksSKU: 89076-4-RNR
filler

Price:
Sale price$549.95


Stock:
Sold out

Description

Maxx®: 1/10 Scale 4WD Brushless Electric Monster Truck. Fully assembled, Ready-to-Race®, with TQi Traxxas Link™ Enabled 2.4GHz Radio System with Traxxas Stability Management (TSM)®, Velineon® VXL-4s Brushless Power System, and ProGraphix® painted body.

REQUIRES BATTERY AND CHARGER:

TRAXXAS 2994 (40MPH)

TRAXXAS 2996X (50+ MPH)

Features

  • VXL-4s™ Waterproof Electronic Speed Control
    • 3S–4S LiPo compatible
    • Built-in cooling fan
    • Real-time telemetry via Traxxas Link
    • Machined heat sinks
    • 10-gauge silicone wire
    • Integrated protection circuits
    • LED status lights
  • Velineon® 540XL Brushless Motor
    • Long format brushless motor
    • 4-pole 2400 kV
    • 5 mm output shaft
    • Aluminum heat sink
    • Cooling fan
  • 55+ MPH out of the box using single 4S LiPo battery (sold separately)
  • 60+ MPH with optional gearing and single 4S LiPo battery (sold separately)
  • Traxxas Stability Management®
    • Helps prevents spinouts and loss of control
    • Adjusts from off to 100% assistance from the transmitter
  • TQi™ 2.4GHz High Output Radio System
    • Traxxas Link enabled
    • 2.4GHz 5-channel micro receiver (#6533) with fail-safe security and integrated telemetry ports
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
    • Multi-Function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • Telemetry-ready 5-channel micro receiver
  • Clipless Body Mount System
    • Quick one-hand installation and removal
    • Uses pivoting rear latch mechanism
    • Eliminates body posts and clips
    • Reinforced for extra protection against tearing
  • Drivetrain
    • Full-time shaft-driven 4-wheel drive
    • Torque-Biasing Center Drive™ absorbs shocks and distributes power
    • 17 mm keyed wheel hex with 5 mm nut
    • Sealed, silicone fluid-filled diffs with large module ring and pinion gears
    • Splined outdrives attached with external thru-bolt method
    • Heavy-duty Cush Drive™
    • Extreme-duty telescoping driveshafts
    • Splined aluminum center driveshaft
  • Secure Motor Mounting System
    • Precision, preset gear mesh adjustments
    • Motor retention separate from gear mesh
    • Full-length motor cradle
  • Heavy-Duty Modular Composite Chassis
    • Interlocking front and rear bulkheads
    • Absorbs and distributes impact energy
    • Easy to service and access components
    • Driveline is sealed in the chassis to keep out dirt and grit
  • Easy Battery Access
    • Battery is protected deep in the chassis
    • Battery hold-downs pivot for easy access
    • More secure than conventional retention systems
  • Bumpers
    • Tough energy absorbing front and rear bumpers
    • Lower front and rear skids for impact and abrasion resistance
    • Integrated nerf bars for side impact resistance
    • Wheelie bar with integrated carry handle
  • Heavy-Duty Steering Bell Cranks and Servo Saver
    • Large-scale high-output steering servo
      • 285oz-in of torque
      • 0.18 sec transit speed
    • New mounting system to fully support case
    • Heavy-duty double-shear bellcranks
  • Suspension
    • Engineered to optimize suspension travel and steering angles
    • All critical suspension points have double shear strength
    • Steel pivot balls
    • 4 mm machined pivot balls
    • C-hub and steering block geometry maximizes steering angle
    • Adjustable roll center
    • Fixed, high-strength camber and toe links
    • Steel upper and lower tie bars
    • Full contact sealed bearings used in exposed locations
  • New GT-Maxx®Shocks
    • Machined aluminum threaded body
    • Extra-large bore and capacity
    • Large-diameter damper shaft
    • Lower seal cartridge with dual X-rings
    • Adjustable upper spring retainer
    • Plastic shock caps with pivot balls
    • Lower spring perches bolted on
  • Wheels/Tires
    • Tough 2.8” wheels with keyed 17 mm hex receptor
    • Large 5.5” all-terrain dual-diameter tires
    • 1-piece foam inserts
    • Pre-glued and ready for action
    • TSM™ rated

Shipping Policy

Currently, Willis Hobbies only ships our products to the United States (including Alaska and Hawaii) and U.S. Territories. If in stock, all orders are shipped from our New York warehouse within 48 hours of purchase. We cannot ship to P.O. Boxes.

Willis Hobbies offers FREE shipping for all orders over $399.99 shipping to the Continental U.S. Only (this does not include Alaska, Hawaii, U.S. Territories or P.O. Boxes).

Please note, we are unable to make any address changes after 48 hours. Please call us directly at 516-746-3944 and reference your order number to submit changes.

Willis Hobbies reserves the right to request signature confirmation as proof of delivery for certain products.

We are not responsible for any damaged items after the product has been received.
We are not responsible for carrier delays due to Covid-19, weather, mechanical or logistical issues.

Shipping charges are non-refundable.

You may also like

Follow us on Instagram